Elegoo ASA

Complete technical data sheet with print conditions, material properties, and performance specifications.

Product Information

ManufacturerElegoo
Product NameASA
Filament TypeASA
FinishStandard

Print Conditions

Nozzle Temperature240-270 °C
Bed Temperature90-100 °C
Print Speed220 mm/s
Build Surface MaterialsTextured PEI, Smooth PEI
Support MaterialSelf-generated support or ASA special support

Technical Properties

Density1.09 g/cm³ρ = m / v
Water Absorption0.42 %
Melt Index14.1 g/10 min ±1.2
Melting Point214 °CDSC
Vicat Softening Temperature102 °CISO 306, GB/T 1633
Heat Deflection Temperature @ 1.8MPa91 °CISO 75
Heat Deflection Temperature @ 0.45MPa99 °CISO 75
Tensile Strength35 MPa ±1ISO 527, GB/T 1040
Tensile Strength (Z)30 MPa ±1ISO 527, GB/T 1040
Young's Modulus (X-Y)1557 MPa ±66ISO 527, GB/T 1040
Elastic Modulus (Z)1489 MPa ±20ISO 527, GB/T 1040
Elongation at Break (X-Y)10.6 % ±0.9ISO 527, GB/T 1040
Elongation at Break (Z)9.4 % ±2.3ISO 527, GB/T 1040
Flexural Strength65 MPa ±4ISO 178, GB/T 9341
Flexural Strength (X-Z)54 MPa ±1ISO 178, GB/T 9341
Flexural Modulus2349 MPa ±102ISO 178, GB/T 9341
Flexural Modulus (X-Z)2219 MPa ±96ISO 178, GB/T 9341
Charpy Impact Strength65.5 kJ/m² ±3.7ISO 179, GB/T 1043
Charpy Impact Strength (Z)11.3 kJ/m² ±3ISO 179, GB/T 1043

Other documentation

Technical Data SheetView Data Sheet

This data sheet is for quick reference only. Data is sourced from manufacturer specifications and should be verified. Always confirm specifications on the manufacturer's official website before making purchasing or design decisions. Report any issues or discrepancies using the button on the right.