Data Sheets/Elegoo/Rapid PETG

Elegoo Rapid PETG

Complete technical data sheet with print conditions, material properties, and performance specifications.

Product Information

ManufacturerElegoo
Product NameRapid PETG
Filament TypePETG
FinishStandard

Print Conditions

Nozzle Temperature240-270 °C
Bed Temperature65-75 °C
Print Speed300 mm/s
Build Surface MaterialsTextured PEI, Smooth PEI
Support MaterialSelf-generated support or PETG special support

Technical Properties

Density1.29 g/cm³ρ = m / v
Water Absorption0.44 %
Melt Index13.4 g/10 min ±3.8
Glass Transition Temperature68 °CDSC
Melting Point216 °CDSC
Vicat Softening Temperature70 °CISO 306, GB/T 1633
Heat Deflection Temperature @ 1.8MPa66 °CISO 75
Heat Deflection Temperature @ 0.45MPa72 °CISO 75
Tensile Strength42 MPa ±2ISO 527, GB/T 1040
Tensile Strength (Z)28 MPa ±3ISO 527, GB/T 1040
Young's Modulus (X-Y)1733 MPa ±101ISO 527, GB/T 1040
Elastic Modulus (Z)1465 MPa ±121ISO 527, GB/T 1040
Elongation at Break (X-Y)8.9 % ±1.5ISO 527, GB/T 1040
Elongation at Break (Z)6.5 % ±1.6ISO 527, GB/T 1040
Flexural Strength68 MPa ±2ISO 178, GB/T 9341
Flexural Strength (X-Z)40 MPa ±2ISO 178, GB/T 9341
Flexural Modulus2097 MPa ±173ISO 178, GB/T 9341
Flexural Modulus (X-Z)1977 MPa ±168ISO 178, GB/T 9341
Charpy Impact Strength67.6 kJ/m² ±4.2ISO 179, GB/T 1043
Charpy Impact Strength (Z)8.9 kJ/m² ±1.1ISO 179, GB/T 1043

Other documentation

Technical Data SheetView Data Sheet

This data sheet is for quick reference only. Data is sourced from manufacturer specifications and should be verified. Always confirm specifications on the manufacturer's official website before making purchasing or design decisions. Report any issues or discrepancies using the button on the right.