Complete technical data sheet with print conditions, material properties, and performance specifications.
| Manufacturer | Elegoo | |
| Product Name | PLA+ | |
| Filament Type | PLA | |
| Finish | Standard |
| Nozzle Temperature | 200-230 °C | |
| Bed Temperature | 35-65 °C | |
| Print Speed | 280 mm/s | |
| Build Surface Materials | Textured PEI, Smooth PEI |
| Diameter | 1.75 mm | |
| Density | 1.3 g/cm³ | |
| Melt index | 6.9 g/10 min ±1.3 | |
| Melting temperature | 161 °C | |
| Vicat softening temperature | 63 °C | |
| Heat deflection temperature (0.45 MPa) | 56 °C | |
| Tensile strength (X-Y) | 38 MPa ±2 | |
| Tensile strength (Z) | 24 MPa ±2 | |
| Elongation at break (X-Y) | 7.9 % ±1.6 | |
| Elongation at break (Z) | 5.9 % ±1.9 | |
| Bending strength (X-Y) | 74 MPa ±4 | |
| Bending strength (Z) | 44 MPa ±3 | |
| Bending modulus (X-Y) | 2979 MPa ±156 | |
| Bending modulus (Z) | 2582 MPa ±115 | |
| Impact strength (X-Y) | 65.5 kJ/m² ±3.6 | |
| Impact strength (Z) | 7.6 kJ/m² ±1.1 |
| ELEGOO PLA Plus product page (Specifications) | Open link |