Elegoo PLA Glow

Complete technical data sheet with print conditions, material properties, and performance specifications.

Product Information

ManufacturerElegoo
Product NamePLA Glow
Filament TypePLA
FinishGlow-in-the-Dark

Print Conditions

Nozzle Temperature190-230 °C
Bed Temperature35-65 °C
Print Speed250 mm/s
Build Surface MaterialsTextured PEI, Smooth PEI
Support MaterialSelf-generated support or PLA special support

Technical Properties

Density1.24 g/cm³ρ = m / v
Water Absorption0.42 %
Melt Index18.1 g/10 min ±3.8
Glass Transition Temperature55 °CDSC
Melting Point157 °CDSC
Vicat Softening Temperature57 °CISO 306, GB/T 1633
Heat Deflection Temperature @ 1.8MPa52 °CISO 75
Heat Deflection Temperature @ 0.45MPa56 °CISO 75
Tensile Strength42 MPa ±2ISO 527, GB/T 1040
Tensile Strength (Z)30 MPa ±1ISO 527, GB/T 1040
Young's Modulus (X-Y)2324 MPa ±104ISO 527, GB/T 1040
Elastic Modulus (Z)1418 MPa ±134ISO 527, GB/T 1040
Elongation at Break (X-Y)7.2 % ±0.6ISO 527, GB/T 1040
Elongation at Break (Z)5.3 % ±0.4ISO 527, GB/T 1040
Flexural Strength77 MPa ±2ISO 178, GB/T 9341
Flexural Strength (X-Z)47 MPa ±4ISO 178, GB/T 9341
Flexural Modulus3190 MPa ±131ISO 178, GB/T 9341
Flexural Modulus (X-Z)3069 MPa ±101ISO 178, GB/T 9341
Charpy Impact Strength34.9 kJ/m² ±3.2ISO 179, GB/T 1043
Charpy Impact Strength (Z)6.4 kJ/m² ±2.1ISO 179, GB/T 1043

Other documentation

Technical Data SheetView Data Sheet

This data sheet is for quick reference only. Data is sourced from manufacturer specifications and should be verified. Always confirm specifications on the manufacturer's official website before making purchasing or design decisions. Report any issues or discrepancies using the button on the right.