eSUN ePA12-CF

Complete technical data sheet with print conditions, material properties, and performance specifications.

Product Information

Version:

Manufacturer	eSUN
Product Name	ePA12-CF
Filament Type	Nylon 12 + Carbon Fiber
Finish	Carbon Fiber

Print Conditions

Nozzle Temperature	270-300 °C
Bed Temperature	45-60 °C
Print Speed	40-100 mm/s

Technical Properties

Density	1.24 g/cm³	GB/T 1033
Melt Index	8.91 g/10 min	GB/T 3682
Tensile Strength	108.18 MPa	GB/T 1040
Elongation at Break (X-Y)	9.02 %	GB/T 1040
Flexural Strength	116.58 MPa	GB/T 9341
Flexural Modulus	3335 MPa	GB/T 9341
IZOD Impact Strength	11.33 kJ/m²	GB/T 1843
Heat Distortion Temperature	94.1 °C	GB/T 1634
Continuous Service Temperature	120 °C	IEC 60216
Maximum (short term) Use Temperature	160 °C

Other documentation

Technical Data Sheet	View Data Sheet	Version 4.01 · 2024-08
Safety Data Sheet	View Safety Sheet	Version A2.0 · 2023-12
https://www.esun3d.com/epa12-product/	Open link

This data sheet is for quick reference only. Data is sourced from manufacturer specifications and should be verified. Always confirm specifications on the manufacturer's official website before making purchasing or design decisions. Report any issues or discrepancies using the button on the right.