eSUN ePA

Complete technical data sheet with print conditions, material properties, and performance specifications.

Product Information

Version:

Manufacturer	eSUN
Product Name	ePA
Filament Type	Nylon (PA6/66 copolymer)
Finish	Standard

Print Conditions

Nozzle Temperature	250-290 °C
Bed Temperature	70-90 °C
Print Speed	40-100 mm/s

Technical Properties

Density	1.12 g/cm³	GB/T 1033
Melt Index	12.3 g/10 min	GB/T 3682
Tensile Strength	52.45 MPa	GB/T 1040
Elongation at Break (X-Y)	175.32 %	GB/T 1040
Flexural Strength	58 MPa	GB/T 9341
Flexural Modulus	1370 MPa	GB/T 9341
IZOD Impact Strength	18.4 kJ/m²	GB/T 1843
Heat Distortion Temperature	50 °C	GB/T 1634

Other documentation

Technical Data Sheet	View Data Sheet	Version 4.0 (re-export) · 2025-05
Safety Data Sheet	View Safety Sheet	2022-08
https://www.esun3d.com/epa-product/	Open link

This data sheet is for quick reference only. Data is sourced from manufacturer specifications and should be verified. Always confirm specifications on the manufacturer's official website before making purchasing or design decisions. Report any issues or discrepancies using the button on the right.