Complete technical data sheet with print conditions, material properties, and performance specifications.
| Manufacturer | eSUN | |
| Product Name | PETG-Basic | |
| Filament Type | PETG | |
| Finish | Basic |
| Nozzle Temperature | 250 °C | |
| Bed Temperature | 70 °C | |
| Print Speed | 250 mm/s |
| Density | 1.27 g/cm³ | GB/T 1033 |
| Melt Flow Index | 28 g/10 min | GB/T 3682 |
| Tensile Strength | 68.41 MPa | GB/T 1040 |
| Tensile Strength (Z) | 35.84 MPa | GB/T 1040 |
| Elongation at Break (X-Y) | 7.56 % | GB/T 1040 |
| Elongation at Break (Z) | 3.17 % | GB/T 1040 |
| Flexural Strength (X-Y) | 100.2 MPa | GB/T 9341 |
| Flexural Strength (X-Z) | 59.7 MPa | GB/T 9341 |
| Flexural Modulus (X-Y) | 2636.66 MPa | GB/T 9341 |
| Flexural Modulus (X-Z) | 2207.6 MPa | GB/T 9341 |
| IZOD Impact Strength (X-Y) | 2.28 kJ/m² | GB/T 1843 |
| Heat Distortion Temperature | 73.8 °C | GB/T 1634 |
| Heat Distortion Temperature (Z) | 68.1 °C | GB/T 1634 |
| Technical Data Sheet | View Data Sheet | Version 1.0 · 2024-07 |
| Safety Data Sheet | View Safety Sheet | 2024-12 |
| https://eu.esun3d.com/petg-basic-refil-product | Open link |