eSUN ePLA-ST

Complete technical data sheet with print conditions, material properties, and performance specifications.

St-natural, 1kg St-grey, 1kg St-black, 1kg

Product Information

Version:

Manufacturer	eSUN
Product Name	ePLA-ST
Filament Type	PLA
Finish	Standard

Print Conditions

Nozzle Temperature	200-230 °C
Bed Temperature	45-60 °C
Print Speed	40-100 mm/s

Technical Properties

Density	1.25 g/cm³	GB/T 1033
Melt Index	3.2 g/10 min	GB/T 3682
Tensile Strength	34.3 MPa	GB/T 1040
Elongation at Break (X-Y)	90 %	GB/T 1040
Flexural Strength	43 MPa	GB/T 9341
Flexural Modulus	1477 MPa	GB/T 9341
IZOD Impact Strength	63 kJ/m²	GB/T 1843
Heat Distortion Temperature	52 °C	GB/T 1634

Other documentation

Technical Data Sheet	View Data Sheet	Version 4.0 · 2021-11
Technical Data Sheet	View Data Sheet	Version 4.0 · 2021-11
Safety Data Sheet	View Safety Sheet	Version 3.2 · 2020-12
https://www.esun3d.com/epla-st-product	Open link

This data sheet is for quick reference only. Data is sourced from manufacturer specifications and should be verified. Always confirm specifications on the manufacturer's official website before making purchasing or design decisions. Report any issues or discrepancies using the button on the right.