Polymaker PC-ABS

Complete technical data sheet with print conditions, material properties, and performance specifications.

Product Information

ManufacturerPolymaker
Product NamePC-ABS
Filament TypePC-ABS
FinishBlend

Print Conditions

Nozzle Temperature250-270 °C
Bed Temperature90-105 °C
Print Speed50-250 mm/s
Cooling FanOFF
Retraction Distance1-3 mm
Retraction Speed20-40 mm/s

Technical Properties

Density1.1 g/cm³ISO 1183, GB/T 1033
Melt Index11-17 g/10 min260 °C, 5 kg
Water Absorption0.352 %
Glass Transition Temperature109 °CDSC, 10 °C/min
Vicat Softening Temperature135 °CISO 306, GB/T 1633
Heat Deflection Temperature @ 1.8MPa106 °CISO 75
Heat Deflection Temperature @ 0.45MPa112 °CISO 75
Young's Modulus (X-Y)1835 MPa ±65ISO 527, GB/T 1040
Elastic Modulus (Z)1677 MPa ±94ISO 527, GB/T 1040
Tensile Strength39.9 MPa ±1ISO 527, GB/T 1040
Tensile Strength (Z)22.9 MPa ±1.2ISO 527, GB/T 1040
Elongation at Break (X-Y)4.2 % ±0.3ISO 527, GB/T 1040
Elongation at Break (Z)1.5 % ±0.1ISO 527, GB/T 1040
Flexural Modulus2081 MPa ±106ISO 178, GB/T 9341
Flexural Strength66.3 MPa ±0.9ISO 178, GB/T 9341
Notched Charpy Impact Strength (X-Y)25.8 kJ/m² ±1.3ISO 179, GB/T 1043
Low Temperature Impact (-30°C)13 kJ/m² ±2ISO 179-1/1eA:2010
Low-temperature impact strength (Z)1.5 kJ/m² ±0.2ISO 179-1/1eA:2010

Additional Characteristics

Effect of Weak AcidsGoodData Sheet
Effect of Strong AcidsPoorData Sheet
Effect of Weak AlkalisFairData Sheet
Effect of Strong AlkalisPoorData Sheet
Effect of Oils and GreaseGoodData Sheet

Other documentation

Technical Data SheetView Data SheetVersion 5.4 · 2024-11
Technical Data SheetView Data SheetVersion 5.5 · 2025-12-10
Safety Data SheetView Safety SheetVersion 1.1 · 2021-12
Polymaker PC-ABS TDS page on wiki.polymaker.comOpen link
Polymaker PC-ABS on us.polymaker.comOpen link

This data sheet is for quick reference only. Data is sourced from manufacturer specifications and should be verified. Always confirm specifications on the manufacturer's official website before making purchasing or design decisions. Report any issues or discrepancies using the button on the right.