Complete technical data sheet with print conditions, material properties, and performance specifications.
| Manufacturer | Polymaker | |
| Product Name | PolyLite PC | |
| Filament Type | PC | |
| Finish | Standard |
| Nozzle Temperature | 250-270°C | |
| Bed Temperature | 90-105°C | |
| Print Speed | 50-200mm/s | |
| Cooling Fan | Off | |
| Retraction Distance | 1-3mm | |
| Retraction Speed | 20-40mm/s | |
| Build Surface Materials | Glass PEI |
| Diameter | 1.75-2.85mm | |
| Density | 1.19g/cm³ | ISO 1183 |
| Melt Index | 8-11g/10 min | |
| Light Transmission | 89% | |
| Glass Transition Temperature | 113°C | DSC |
| Decomposition Temperature | 360°C | |
| Vicat Softening Temperature | 120°C | ISO 306 |
| Heat Distortion Temperature (1.8 MPa) | 107°C | ISO 75 |
| Young's Modulus (X-Y) | 2497MPa | ISO 527 |
| Young's Modulus (Z) | 2371MPa | ISO 527 |
| Tensile Strength (X-Y) | 69.1MPa | ISO 527 |
| Tensile Strength (Z) | 52.8MPa | ISO 527 |
| Elongation at Break (X-Y) | 4.8% | ISO 527 |
| Elongation at Break (Z) | 2.7% | ISO 527 |
| Bending Modulus (X-Y) | 2640MPa | ISO 178 |
| Bending Strength (X-Y) | 106.1MPa | ISO 178 |
| Charpy Impact Strength (X-Y) | 4.1kJ/m² | ISO 179 |
| Transparency | Naturally transparent | https://wiki.polymaker.com/polymaker-products/more-about-our-products/documents/technical-data-sheets/polycarbonate/polylite-tm-pc |
| Effect of Weak Acids | Good | https://wiki.polymaker.com/polymaker-products/more-about-our-products/documents/technical-data-sheets/polycarbonate/polylite-tm-pc |
| Effect of Strong Acids | Poor | https://wiki.polymaker.com/polymaker-products/more-about-our-products/documents/technical-data-sheets/polycarbonate/polylite-tm-pc |
| Effect of Weak Alkalis | Fair | https://wiki.polymaker.com/polymaker-products/more-about-our-products/documents/technical-data-sheets/polycarbonate/polylite-tm-pc |
| Effect of Strong Alkalis | Poor | https://wiki.polymaker.com/polymaker-products/more-about-our-products/documents/technical-data-sheets/polycarbonate/polylite-tm-pc |
| Effect of Oils and Grease | Good | https://wiki.polymaker.com/polymaker-products/more-about-our-products/documents/technical-data-sheets/polycarbonate/polylite-tm-pc |