Polymaker PolyMax PC

Complete technical data sheet with print conditions, material properties, and performance specifications.

Product Information

ManufacturerPolymaker
Product NamePolyMax PC
Filament TypePC
FinishEngineered

Print Conditions

Nozzle Temperature250-270 °C
Bed Temperature90-105 °C
Print Speed50-200 mm/s
Cooling FanOFF
Retraction Distance1-3 mm
Retraction Speed20-40 mm/s
Support MaterialPolyDissolve S1, PolySupport

Technical Properties

Density1.19 g/cm³ISO 1183, GB/T 1033
Melt Index6-8 g/10 min260 °C, 1.2 kg
Water Absorption0.253 %
Glass Transition Temperature113 °CDSC, 10 °C/min
Decomposition Temperature360 °CTGA, 20 °C/min
Vicat Softening Temperature117 °CISO 306, GB/T 1633
Heat Deflection Temperature @ 1.8MPa99 °CISO 75
Heat Deflection Temperature @ 0.45MPa114 °CISO 75
Young's Modulus (X-Y)2435 MPa ±63ISO 527, GB/T 1040
Elastic Modulus (Z)2149 MPa ±119ISO 527, GB/T 1040
Tensile Strength53.44 MPa ±0.6ISO 527, GB/T 1040
Tensile Strength (Z)41.43 MPa ±1.5ISO 527, GB/T 1040
Elongation at Break (X-Y)4.53 % ±0.45ISO 527, GB/T 1040
Elongation at Break (Z)2.79 % ±0.21ISO 527, GB/T 1040
Flexural Modulus2050 MPa ±79ISO 178, GB/T 9341
Flexural Strength81.29 MPa ±1.53ISO 178, GB/T 9341
Notched Charpy Impact Strength (X-Y)21.28 kJ/m² ±1.69ISO 179, GB/T 1043

Additional Characteristics

Effect of Weak AcidsGoodData Sheet
Effect of Strong AcidsPoorData Sheet
Effect of Weak AlkalisFairData Sheet
Effect of Strong AlkalisPoorData Sheet
Effect of Oils and GreaseGoodData Sheet

Other documentation

Technical Data SheetView Data SheetVersion 5.4 · 2024-11
Technical Data SheetView Data SheetVersion 5.5 · 2026-01-05
Safety Data SheetView Safety SheetVersion 1.0 · 2024-12
PolyMax PC TDS page on wiki.polymaker.comOpen link
PolyMax PC on us.polymaker.comOpen link

This data sheet is for quick reference only. Data is sourced from manufacturer specifications and should be verified. Always confirm specifications on the manufacturer's official website before making purchasing or design decisions. Report any issues or discrepancies using the button on the right.