Complete technical data sheet with print conditions, material properties, and performance specifications.
| Manufacturer | Polymaker | |
| Product Name | PolyLite PETG | |
| Filament Type | PETG | |
| Finish | Standard |
| Nozzle Temperature | 230-260 °C | |
| Bed Temperature | 70-80 °C | |
| Print Speed | 50-100 mm/s | |
| Cooling Fan | Off-20% | |
| Retraction Distance | 1-3 mm | |
| Retraction Speed | 20-40 mm/s | |
| Build Surface Materials | Glass, PEI |
| Diameter | 1.75-2.85 mm ±0.03 | |
| Density | 1.25 g/cm³ | ISO 1183 |
| Melt Index | 10.8 g/10 min | ISO 1133, 240°C |
| Glass Transition Temperature | 81 °C | DSC |
| Vicat Softening Temperature | 84 °C | ISO 306 |
| Heat Distortion Temperature (1.8 MPa) | 75 °C | ISO 75 |
| Young's Modulus (X-Y) | 2116.8 MPa ±68.1 | ISO 527 |
| Young's Modulus (Z) | 1898.7 MPa ±98.5 | ISO 527 |
| Tensile Strength (X-Y) | 50.8 MPa ±0.9 | ISO 527 |
| Tensile Strength (Z) | 42.8 MPa ±2.8 | ISO 527 |
| Elongation at Break (X-Y) | 8.4 % ±1.7 | ISO 527 |
| Elongation at Break (Z) | 3.3 % ±0.2 | ISO 527 |
| Bending Modulus (X-Y) | 1898.5 MPa ±35.5 | ISO 178 |
| Bending Strength (X-Y) | 69.6 MPa ±0.8 | ISO 178 |
| Charpy Impact Strength (X-Y) | 2.6 kJ/m² ±0.2 | ISO 179 |
| Light Transmission | 90 % |
| Effect of Weak Acids | Good | https://wiki.polymaker.com/polymaker-products/more-about-our-products/documents/technical-data-sheets/petg-pet/polylite-tm-petg |
| Effect of Strong Acids | Poor | https://wiki.polymaker.com/polymaker-products/more-about-our-products/documents/technical-data-sheets/petg-pet/polylite-tm-petg |
| Effect of Weak Alkalis | Fair | https://wiki.polymaker.com/polymaker-products/more-about-our-products/documents/technical-data-sheets/petg-pet/polylite-tm-petg |
| Effect of Strong Alkalis | Poor | https://wiki.polymaker.com/polymaker-products/more-about-our-products/documents/technical-data-sheets/petg-pet/polylite-tm-petg |
| Effect of Oils and Grease | Good | https://wiki.polymaker.com/polymaker-products/more-about-our-products/documents/technical-data-sheets/petg-pet/polylite-tm-petg |