Complete technical data sheet with print conditions, material properties, and performance specifications.
| Manufacturer | Polymaker | |
| Product Name | PolyMax PETG | |
| Filament Type | PETG | |
| Finish | Nano-reinforced |
| Nozzle Temperature | 230-260 °C | |
| Bed Temperature | 70-80 °C | |
| Print Speed | 30-50 mm/s | |
| Cooling Fan | Off | |
| Retraction Distance | 1-3 mm | |
| Retraction Speed | 20-40 mm/s | |
| Build Surface Materials | Glass, PEI |
| Diameter | 1.75-2.85 mm ±0.03 | |
| Density | 1.24 g/cm³ | ISO 1183 |
| Melt Index | 9 g/10 min | ISO 1133, 240°C |
| Glass Transition Temperature | 79 °C | DSC |
| Decomposition Temperature | 373 °C | |
| Vicat Softening Temperature | 82 °C | ISO 306 |
| Heat Distortion Temperature (1.8 MPa) | 72 °C | ISO 75 |
| Young's Modulus (X-Y) | 1684 MPa ±135 | ISO 527 |
| Young's Modulus (Z) | 1603 MPa ±40 | ISO 527 |
| Tensile Strength (X-Y) | 37.9 MPa ±1.4 | ISO 527 |
| Tensile Strength (Z) | 29.4 MPa ±1 | ISO 527 |
| Elongation at Break (X-Y) | 5.22 % ±1.5 | ISO 527 |
| Elongation at Break (Z) | 3.1 % ±0.51 | ISO 527 |
| Bending Modulus (X-Y) | 1068 MPa ±94 | ISO 178 |
| Bending Strength (X-Y) | 58.3 MPa ±0.38 | ISO 178 |
| Bending Strength (Z) | 55.1 MPa ±4.9 | ISO 178 |
| Charpy Impact Strength (X-Y) | 11.6 kJ/m² ±0.8 | ISO 179 |
| Charpy Impact Strength (Z) | 2.4 kJ/m² ±0.6 | ISO 179 |
| Effect of Weak Acids | Good | https://wiki.polymaker.com/polymaker-products/more-about-our-products/documents/technical-data-sheets/petg-pet/polymax-tm-petg |
| Effect of Strong Acids | Poor | https://wiki.polymaker.com/polymaker-products/more-about-our-products/documents/technical-data-sheets/petg-pet/polymax-tm-petg |
| Effect of Weak Alkalis | Fair | https://wiki.polymaker.com/polymaker-products/more-about-our-products/documents/technical-data-sheets/petg-pet/polymax-tm-petg |
| Effect of Strong Alkalis | Poor | https://wiki.polymaker.com/polymaker-products/more-about-our-products/documents/technical-data-sheets/petg-pet/polymax-tm-petg |
| Effect of Oils and Grease | Good | https://wiki.polymaker.com/polymaker-products/more-about-our-products/documents/technical-data-sheets/petg-pet/polymax-tm-petg |