Data Sheets/Polymaker/PolyLite PLA Pro

Polymaker PolyLite PLA Pro

Complete technical data sheet with print conditions, material properties, and performance specifications.

Product Information

ManufacturerPolymaker
Product NamePolyLite PLA Pro
Filament TypePLA
FinishEnhanced

Print Conditions

Nozzle Temperature190-230 °C
Bed Temperature30-60 °C
Print Speed50-200 mm/s
Cooling FanON
Retraction Distance1-3 mm
Retraction Speed20-40 mm/s
Support MaterialPolySupport and PolyDissolve S1

Technical Properties

Density1.23 g/cm³ISO 1183, GB/T 1033
Melt Index15.5 g/10 min210 °C, 2.16 kg
Water Absorption0.291 %
Glass Transition Temperature62 °CDSC, 10 °C/min
Melting Point150 °CDSC, 10 °C/min
Vicat Softening Temperature63 °CISO 306, GB/T 1633
Heat Deflection Temperature @ 1.8MPa58 °CISO 75
Heat Deflection Temperature @ 0.45MPa59 °CISO 75
Young's Modulus (X-Y)2932.2 MPa ±55.3ISO 527, GB/T 1040
Elastic Modulus (Z)2633 MPa ±117.4ISO 527, GB/T 1040
Tensile Strength49.8 MPa ±0.4ISO 527, GB/T 1040
Tensile Strength (Z)36.5 MPa ±0.6ISO 527, GB/T 1040
Elongation at Break (X-Y)6.3 % ±0.9ISO 527, GB/T 1040
Elongation at Break (Z)2.4 % ±0.3ISO 527, GB/T 1040
Flexural Modulus2933.8 MPa ±78.3ISO 178, GB/T 9341
Flexural Strength77.9 MPa ±0.4ISO 178, GB/T 9341
Notched Charpy Impact Strength (X-Y)17.1 kJ/m² ±1.2ISO 179, GB/T 1043

Additional Characteristics

Effect of Weak AcidsGoodData Sheet
Effect of Strong AcidsPoorData Sheet
Effect of Weak AlkalisFairData Sheet
Effect of Strong AlkalisPoorData Sheet
Effect of Oils and GreaseGoodData Sheet

Other documentation

Technical Data SheetView Data SheetVersion 5.5 · 2025-10
Technical Data SheetView Data SheetVersion 5.6 · 2026-01-05
Safety Data SheetView Safety SheetVersion 1.2 · 2024-06-20
PolyLite PLA Pro TDS page on wiki.polymaker.comOpen link
PolyLite PLA Pro on us.polymaker.comOpen link

This data sheet is for quick reference only. Data is sourced from manufacturer specifications and should be verified. Always confirm specifications on the manufacturer's official website before making purchasing or design decisions. Report any issues or discrepancies using the button on the right.