Data Sheets/Polymaker/PolyFlex TPU90

Polymaker PolyFlex TPU90

Complete technical data sheet with print conditions, material properties, and performance specifications.

Product Information

ManufacturerPolymaker
Product NamePolyFlex TPU90
Filament TypeTPU
FinishStandard

Print Conditions

Nozzle Temperature210-230 °C
Bed Temperature25-60 °C
Print Speed30-70 mm/s
Cooling FanON
Retraction Distance3-6 mm
Retraction Speed40-60 mm/s
Support MaterialPolyDissolve S1

Technical Properties

Density1.21 g/cm³ISO 1183, GB/T 1033
Melt Index6.1 g/10 min185 °C, 1.2 kg
Water Absorption0.67 %
100% Modulus (X-Y)7.1 MPa ±0.3ISO 37, GB/T 528
200% Modulus (X-Y)9 MPa ±0.9ISO 37, GB/T 528
300% Modulus (X-Y)13.2 MPa ±0.6ISO 37, GB/T 528
400% Modulus (X-Y)19 MPa ±0.9ISO 37, GB/T 528
Tensile Strength30.1 MPa ±2.4ISO 37, GB/T 528
Elongation at Break (X-Y)592.1 % ±32.9ISO 37, GB/T 528
Shore Hardness90 Shore AISO 7619-1, GB/T 531.1

Additional Characteristics

Effect of Weak AcidsFairData Sheet
Effect of Strong AcidsPoorData Sheet
Effect of Weak AlkalisFairData Sheet
Effect of Strong AlkalisPoorData Sheet
Effect of Oils and GreaseGoodData Sheet

Other documentation

Technical Data SheetView Data SheetVersion 5.5 · 2024-11
Technical Data SheetView Data SheetVersion 5.6 · 2025-12-11
Safety Data SheetView Safety SheetVersion 1.0 · 2020-07-29
PolyFlex TPU90 TDS page on wiki.polymaker.comOpen link
PolyFlex TPU90 on us.polymaker.comOpen link

This data sheet is for quick reference only. Data is sourced from manufacturer specifications and should be verified. Always confirm specifications on the manufacturer's official website before making purchasing or design decisions. Report any issues or discrepancies using the button on the right.