🌀 SpoolScout
Data Sheets/Polymaker/PolyFlex TPU95

Polymaker PolyFlex TPU95

Complete technical data sheet with print conditions, material properties, and performance specifications.

Yellow, 0.75kg - $25.49Black, 0.75kg - $29.99

Product Information

ManufacturerPolymaker
Product NamePolyFlex TPU95
Filament TypeTPU
FinishStandard

Print Conditions

Nozzle Temperature210-230°C
Bed Temperature25-60°C
Print Speed30-50mm/s
Cooling FanOn
Retraction Distance3-6mm
Retraction Speed40-60mm/s
Build Surface Materials
Glass
PEI

Technical Properties

Diameter1.75-2.85mm
Density1.2-1.24g/cm³ISO 1183
Melt Index3-6g/10 minISO 1133, 210°C
Shore Hardness95A
Elongation at Break (X-Y)551.2%ISO 527
Young's Modulus (X-Y)33.6MPaISO 527
100% Modulus (X-Y)11.1MPaISO 527
200% Modulus (X-Y)15MPaISO 527
300% Modulus (X-Y)21MPaISO 527
400% Modulus (X-Y)25.8MPaISO 527

Additional Characteristics

Stretch Capability3x original lengthhttps://wiki.polymaker.com/polymaker-products/more-about-our-products/documents/technical-data-sheets/tpu/polyflex-tm-tpu95
Effect of Weak AcidsFairhttps://wiki.polymaker.com/polymaker-products/more-about-our-products/documents/technical-data-sheets/tpu/polyflex-tm-tpu95
Effect of Strong AcidsPoorhttps://wiki.polymaker.com/polymaker-products/more-about-our-products/documents/technical-data-sheets/tpu/polyflex-tm-tpu95
Effect of Weak AlkalisFairhttps://wiki.polymaker.com/polymaker-products/more-about-our-products/documents/technical-data-sheets/tpu/polyflex-tm-tpu95
Effect of Strong AlkalisPoorhttps://wiki.polymaker.com/polymaker-products/more-about-our-products/documents/technical-data-sheets/tpu/polyflex-tm-tpu95
Effect of Oils and GreaseGoodhttps://wiki.polymaker.com/polymaker-products/more-about-our-products/documents/technical-data-sheets/tpu/polyflex-tm-tpu95

This data sheet is for quick reference only. Data is sourced from manufacturer specifications and should be verified. Always confirm specifications on the manufacturer's official website before making purchasing or design decisions. Report any issues or discrepancies using the button on the right.