Polymaker PolyMax PETG White
Latest priceUnavailable
Buy on Amazon →| Manufacturer | Polymaker |
| Filament type | PETG |
| Data sheet | Not available |
| Format | - |
| Finish | Nano-reinforced |
| Color | White Available in 1 other colors → |
| Warranty | No info provided |
| Availability | API Error: 403 |
| Image |  Polymaker PolyMax Tough PETG Filament 2.85mm White 0.75kg 3D Printer Filament, Tougher PETG+ White 3D Printing Filament, Higher Heat Resistance Than PLA |
Technical properties
| Density | 1.24 g/cm³ | ISO 1183, GB/T 1033 |
| Melt index | 9 g/10 min | 240 °C, 2.16kg |
| Glass transition temperature | 79 °C | DSC, 10 °C/min |
| Decomposition temperature | 373 °C | TGA, 20 °C/min |
| Vicat softening temperature | 82 °C | ISO 306, GB/T 1633 |
| Young's modulus (X-Y) | 1684 MPa ±135 | ISO 527, GB/T 1040 |
| Young's modulus (Z) | 1603 MPa ±40 | ISO 527, GB/T 1040 |
| Tensile strength (X-Y) | 37.9 MPa ±1.4 | ISO 527, GB/T 1040 |
| Tensile strength (Z) | 29.4 MPa ±1 | ISO 527, GB/T 1040 |
| Elongation at break (X-Y) | 5.22 % ±1.5 | ISO 527, GB/T 1040 |
| Elongation at break (Z) | 3.1 % ±0.51 | ISO 527, GB/T 1040 |
| Bending modulus (X-Y) | 1068 MPa ±94 | ISO 178, GB/T 9341 |
| Bending strength (X-Y) | 58.3 MPa ±0.38 | ISO 178, GB/T 9341 |
| Bending strength (Z) | 55.1 MPa ±4.9 | ISO 178, GB/T 9341 |
| Notched Charpy impact strength (X-Y) | 11.6 kJ/m² ±0.8 | ISO 179, GB/T 1043 |
Characteristics
| Resistance to weak acids | Good | Data Sheet |
| Resistance to strong acids | Poor | Data Sheet |
| Resistance to weak alkalis | Fair | Data Sheet |
| Resistance to strong alkalis | Poor | Data Sheet |
| Resistance to oils and grease | Good | Data Sheet |
Print suggestions
| Nozzle temp | 230-260 °C |
| Build surface treatment | PC and Texture PEI (Glue when needed) |
| Build surface temp | 70-80 °C |
| Cooling fan | OFF-20% |
| Print speed | 50-100 mm/s |
| Retraction distance | 1-3 mm |
| Retraction speed | 20-40 mm/s |
| Enclosed chamber | No Needed |
| Support material | PolyDissolve S1 |
| Drying temperature | 65 °C |
| Drying time | 6 hours |
More from Polymaker
- Polymaker CosPLA Version A Gray · $22.49
- Polymaker Fiberon PA12-CF10 Black · $37.99
- Polymaker Fiberon PA6-CF20 Black · $39.99
- Polymaker Fiberon PA6-GF25 Grey · $29.99
- Polymaker HT-PLA Black · $21.24
- Polymaker PC-ABS · $34.99
- Polymaker Panchroma Matte PLA Army Dark Green · $20.99
- Polymaker PolyFlex TPU95 Yellow · $29.99
- Polymaker PolyFlex TPU95-HF Black · $49.99
- Polymaker PolyLite ABS Blue · $22.99
- Polymaker PolyLite ASA Red · $32.99
- Polymaker PolyLite LW-PLA · $29.99
Product prices and availability are accurate as of the date/time indicated and are subject to change. Some content on this site is provided by Amazon. This content is subject to change or removal at any time. All other content is copyright SpoolScout.com
Last updated: 2026-10-05